| Hot Melt
HP 800
Extremely Tough Hot Melt Packaging Tape
Extremely tough hot melt packaging tape used for manual and automated industrial sealing to create heavy duty carton seals to protect high-value items such as military supplies and electronics, as well as for sealing hazardous materials and chemicals. The strongest, thickest packaging tape available within the HP Series line, HP 800 delivers excellent high-tack adhesion and high abrasion and tear resistance, helping to ensure the tape lasts the life of the box.
HP 800
Extremely Tough Hot Melt Packaging Tape
Extremely tough hot melt packaging tape used for manual and automated industrial sealing to create heavy duty carton seals to protect high-value items such as military supplies and electronics, as well as for sealing hazardous materials and chemicals. The strongest, thickest packaging tape available within the HP Series line, HP 800 delivers excellent high-tack adhesion and high abrasion and tear resistance, helping to ensure the tape lasts the life of the box.
- Heavy duty grade, extremely tough packaging tape
- Aggressive quick stick, bonding strength and holding power for a long-lasting, secure seal
- Instant, permanent bond to a wide range of substrates and surfaces
- Special release coating for Good to the Core® performance and consistent, low force unwind off the roll
Technical data for HP 800
Sizes & Colors
Colors Available
| Standard Widths | 1.88 in, 2.83 in 48 mm, 72 mm |
|---|---|
| Standard Lengths | 1000 yd, 54.6 yd 50 m, 914 m |
Construction
| Adhesive | Synthetic rubber/resin hot melt adhesive |
|---|---|
| Backing | 50 micron polyester film |
Applicable Standards
| ASTM D 1974/D 1974M-22 |
| ASTM D 5486M-06, Type I, Class 2 |
| ASTM D 5486M-06, Type II, Class 2 |
| CID A-A-1684C |
| FDA Indirect Contact CFR 21, 175.105 |
Properties
| Adhesion to Backing | 6 oz/in width 0.66 N/10 mm |
|---|---|
| Application Temperature Max | 110 F 43 C |
| Adhesion to Stainless Steel | 95 oz/in width 10.4 N/10 mm |
| Application Temperature Min | 35 F 2 C |
| Elongation | 130% 130% |
| Standard Core Size | 3 in |
| Holding Power to Fiberboard | 45,000 minutes 45,000 minutes |
| Service Temperature Max | 150 F 66 C |
| Service Temperature Min | -20 F -29 C |
| Tensile Strength - Longitudinal Direction | 54 lbs/in width 94.6 N/10 mm |
| Thickness | 3.4 mils 0.086 mm |
Storage & Usage Conditions
Tape should be stored in its original packaging in a cool, dry area away from direct sunlight and should be used within 12 months of date of shipment. Surfaces to which tape is applied should be clean, dry and free of grease, oil or other contaminants.
Physical and performance characteristics shown above are obtained from tests recommended by PSTC, ASTM, government agencies or Shurtape Technologies, LLC, Quality Assurance and Technical Service departments and do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user’s method of application before use.
Related products
Engineered to compliment HP 800 Extremely Tough Hot Melt Packaging Tape
