| Hot Melt
HP 500
Heavy Duty Grade Hot Melt Packaging Tape
Heavy duty grade hot melt packaging tape for manual or automated industrial sealing of heavy, bulky cartons, including overstuffed or under-filled cartons, in high stress and extreme handling conditions. HP 500® is constructed to be tough with excellent grip and Hold Strong® technology, ensuring it can withstand the rigors of the distribution network.
HP 500
Heavy Duty Grade Hot Melt Packaging Tape
Heavy duty grade hot melt packaging tape for manual or automated industrial sealing of heavy, bulky cartons, including overstuffed or under-filled cartons, in high stress and extreme handling conditions. HP 500® is constructed to be tough with excellent grip and Hold Strong® technology, ensuring it can withstand the rigors of the distribution network.
- Heavy duty grade packaging tape
- Aggressive quick stick, bonding strength and holding power for a long-lasting, secure seal
- Instant, permanent bond to a wide range of substrates and surfaces
- Special release coating for Good to the Core® consistent, low force unwind off the roll
Technical data for HP 500
Sizes & Colors
Colors Available
| Standard Widths | 1.88 in, 2.83 in 48 mm, 72 mm |
|---|---|
| Standard Lengths | 109.3 yd 1000 yd, 54.6 yd, 60.1 yd 100 m, 50 m, 55 m, 914 m |
Construction
| Adhesive | Synthetic rubber/resin hot melt adhesive |
|---|---|
| Backing | 50 micron cast biaxially oriented polypropylene film |
Applicable Standards
| ASTM D 1974/D 1974M-22 |
| CID A-A-1684C |
| FDA Indirect Contact CFR 21, 175.105 |
Properties
| Adhesion to Backing | 6 oz/in width 0.66 N/10 mm |
|---|---|
| Application Temperature Max | 110 F 43 C |
| Adhesion to Stainless Steel | 58 oz/in width 6.35 N/10 mm |
| Application Temperature Min | 35 F 2 C |
| Elongation | 150% 150% |
| Standard Core Size | 3 in |
| Holding Power to Fiberboard | 45,000 minutes 45,000 minutes |
| Service Temperature Max | 150 F 66 C |
| Service Temperature Min | -20 F -29 C |
| Tensile Strength - Longitudinal Direction | 42 lbs/in width 73.6 N/10 mm |
| Tensile Strength - Transverse Direction | 74 lbs/in width 129.6 N/10 mm |
| Thickness | 3.0 mils 0.076 mm |
Storage & Usage Conditions
Tape should be stored in its original packaging in a cool, dry area away from direct sunlight and should be used within 12 months of date of shipment. Surfaces to which tape is applied should be clean, dry and free of grease, oil or other contaminants.
Physical and performance characteristics shown above are obtained from tests recommended by PSTC, ASTM, government agencies or Shurtape Technologies, LLC, Quality Assurance and Technical Service departments and do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user’s method of application before use.
Related products
Engineered to compliment HP 500® Heavy Duty Grade Hot Melt Packaging Tape
