Packaging Tapes
HP 200
HP 200® Production Grade Hot Melt Packaging Tape
Production grade hot melt packaging tape for manual or automated industrial sealing of medium-weight cartons in everyday manufacturing and shipping environments. HP 200® is engineered with an aggressive, high-tack adhesive and Hold Strong® technology, for superior performance that keeps carton seals intact.
Features & Benefits
- Production purpose grade, medium duty packaging tape
- Instant, permanent bond to a wide range of substrates and surfaces
- Special release coating for Good to the Core® performance and consistent, low force unwind off the roll
- High-tack synthetic rubber/resin hot melt adhesive featuring Hold Strong® technology for a long-lasting, secure seal
- Available in a variety of colors
Related Products
FE-2
FE-2" hand dispenser offering Folded Edge® Technology for manual case sealing applications.
SP 7000
Carton sealing solution that combines tape and tape applicator technology for automated carton sealing applications.
HP 232
Cold environment, production grade hot melt packaging tape for sealing medium-weight cartons in temperatures from 20 F to 75 F.
HP 235
Medium duty hot melt packaging tape for sealing highly recycled cartons, including 100 percent recycled.
Typical Applications
-
For manual or automated industrial carton sealing of medium-weight cartons in normal manufacturing and shipping environments
Markets
Specifications
Construction
- Backing: 30 micron cast biaxially oriented polypropylene film
- Adhesive: Synthetic rubber/resin hot melt adhesive
- Liner: NA

Properties & Technical Data
Property | Standard | Metric |
---|---|---|
Adhesion to Backing - Hand Rolls Only | 18 oz/in width | 1.97 N/10 mm |
Adhesion to Backing - Machine Rolls Only | 4 oz/in width | 0.44 N/10 mm |
Adhesion to Stainless Steel | 44 oz/in width | 4.82 N/10 mm |
Application Temperature Range | 35 F to 110 F | 2 C to 43 C |
Elongation | 150% | 150% |
Holding Power to Fiberboard | 15,000 minutes | 15,000 minutes |
Service Temperature Range | -20 F to 150 F | -29 C to 66 C |
Tensile Strength - Longitudinal Direction | 27 lbs/in width | 47.3 N/10 mm |
Tensile Strength - Transverse Direction | 44 lbs/in width | 77.1 N/10 mm |
Thickness - Hand Roll | 1.8 mils | 0.046 mm |
Thickness - Machine Roll | 1.9 mils | 0.048 mm |
Physical and performance characteristics shown above are obtained from tests recommended by PSTC, ASTM, government agencies or Shurtape Technologies, LLC, Quality Assurance and Technical Service departments and do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user’s method of application before use.
Applicable Standards
ASTM D 1974/D 1974M-16, CID A-A-1684C, FDA Indirect Contact CFR 21, 175.105, FDA Indirect Contact CFR 21, 177.1520
Customer Review
“The HP Series tape is bar-none.” -Craig Confer, Maintenance Planner, Hilex Poly Co. LLC
Sizes & Colors
Colors Available:
Clear (CLR) White (WHI)
Orange (ORG)
Tan (TAN)
Blue (BLU)
Black (BLK)
Green (GRN)
Red (RED)
Yellow (YEL)
Lengths Available: 54.6 yd, 109.3 yd, 1000 yd, 1500 yd, 2000 yd
Widths Available: 1.41 in, 1.88 in, 2.08 in, 2.83 in
Sizes and colors disclaimer: Lead times may apply. Please contact Shurtape customer service for information related to stock and non-stock sizes and colors.
Storage & Usage Conditions
Tape should be stored in its original packaging in a cool, dry area away from direct sunlight and should be used within 12 months of date of shipment. Surfaces to which tape is applied should be clean, dry and free of grease, oil or other contaminants.
Where to Buy
Shurtape Packaging Tapes products can be found online or nationwide at the following preferred retailers. Check our Where to Buy page for more information on where to buy Shurtape products.