| Hot Melt
HP 100
General Purpose Grade Hot Melt Packaging Tape
General purpose grade hot melt packaging tape for manual or automated industrial sealing of lightweight cartons with minimal exposure to handling, shipping and load stress. HP 100® is engineered with an aggressive high-tack adhesive and Hold Strong® technology to keep carton seals intact.
HP 100
General Purpose Grade Hot Melt Packaging Tape
General purpose grade hot melt packaging tape for manual or automated industrial sealing of lightweight cartons with minimal exposure to handling, shipping and load stress. HP 100® is engineered with an aggressive high-tack adhesive and Hold Strong® technology to keep carton seals intact.
- General purpose grade, light duty packaging tape
- Instant, permanent bond to a wide range of substrates and surfaces
- Special release coating for Good to the Core® performance and consistent, low force unwind off the roll
- High-tack synthetic rubber/resin hot melt adhesive featuring Hold Strong® technology for a long-lasting, secure seal
Technical data for HP 100
Sizes & Colors
Colors Available
| Standard Widths | 1.88 in, 2.08 in, 2.83 in 48 mm, 53 mm, 72 mm |
|---|---|
| Standard Lengths | 1000 yd, 109.3 yd, 1500 yd, 1640.4 yd, 2000 yd, 54.6 yd 100 m, 1371 m, 1500 m, 1828 m, 50 m, 914 m |
Construction
| Adhesive | Synthetic rubber/resin hot melt adhesive |
|---|---|
| Backing | 25 micron cast biaxially oriented polypropylene film |
Applicable Standards
| CID A-A-1684C |
| FDA Indirect Contact CFR 21, 175.105 |
Properties
| Adhesion to Backing - Hand Rolls Only | 18 oz/in width 1.97 N/10 mm |
|---|---|
| Adhesion to Backing - Machine Rolls Only | 4 oz/in width 0.44 N/10 mm |
| Application Temperature Max | 110 F 43 C |
| Adhesion to Stainless Steel | 43 oz/in width 4.71 N/10 mm |
| Application Temperature Min | 35 F 2 C |
| Elongation | 150% 150% |
| Standard Core Size | 3 in |
| Holding Power to Fiberboard | 10,000 minutes 10,000 minutes |
| Service Temperature Max | 150 F 66 C |
| Service Temperature Min | -20 F -29 C |
| Tensile Strength - Longitudinal Direction | 21 lbs/in width 36.8 N/10 mm |
| Tensile Strength - Transverse Direction | 36 lbs/in width 63.0 N/10 mm |
| Thickness | 1.6 mils 0.041 mm |
Storage & Usage Conditions
Tape should be stored in its original packaging in a cool, dry area away from direct sunlight and should be used within 12 months of date of shipment. Surfaces to which tape is applied should be clean, dry and free of grease, oil or other contaminants.
Physical and performance characteristics shown above are obtained from tests recommended by PSTC, ASTM, government agencies or Shurtape Technologies, LLC, Quality Assurance and Technical Service departments and do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user’s method of application before use.
Related products
Engineered to compliment HP 100® General Purpose Grade Hot Melt Packaging Tape
