rHP 255
Custom-Printed, High Tack 90% PCR rPET Hot Melt Packaging Tape
Sustainable, medium duty packaging tape made with 90% post-consumer recycled (PCR) rPET film that can be custom printed with a logo or message to prevent pilferage and allow personalization of outgoing cartons. For manual and automated carton sealing applications, rHP 255 is designed with an enhanced hot melt adhesive system and features Hold Strong® technology that offers higher shear, tack and adhesion to produce better seals, no matter the recycled content of the carton.
rHP 255
Custom-Printed, High Tack 90% PCR rPET Hot Melt Packaging Tape
Sustainable, medium duty packaging tape made with 90% post-consumer recycled (PCR) rPET film that can be custom printed with a logo or message to prevent pilferage and allow personalization of outgoing cartons. For manual and automated carton sealing applications, rHP 255 is designed with an enhanced hot melt adhesive system and features Hold Strong® technology that offers higher shear, tack and adhesion to produce better seals, no matter the recycled content of the carton.
- 90% post-consumer recycled 23 micron rPET film
- Custom-printed for personalization
- Recycled™ Series medium duty packaging tape for use on highly recycled or 100% PCW/OCC cartons
- Higher shear, tack and adhesion on recycled corrugate, recycled paper and a variety of other substrates
- Special release coating for Good to the Core® performance and consistent, low force unwind off the roll
Technical data for rHP 255
Sizes & Colors
Colors Available
| Standard Widths | 1.88 in, 2.83 in 48 mm, 72 mm |
|---|---|
| Standard Lengths | 1000 yd, 109.3 yd 100 m, 914.4 m |
Construction
| Adhesive | Synthetic rubber/resin hot melt adhesive |
|---|---|
| Backing | 23 micron 90% Post-Consumer Recycled rPET film |
Applicable Standards
| ASTM D 1974/D 1974M-16 |
| CID A-A-1684C |
| FDA Indirect Contact CFR 21, 175.105 |
Properties
| Standard Core Size | 3 in |
|---|---|
| Adhesion to Backing - Machine Rolls Only | 10 oz/in width 1.09 N/10 mm |
| Adhesion to Stainless Steel | 63 oz/in width 6.9 N/10 mm |
| Application Temperature Max | 110 F 43 C |
| Application Temperature Min | 35 F 2 C |
| Elongation | 135% 135% |
| Holding Power to Fiberboard | 15,000 minutes 15,000 minutes |
| Service Temperature Max | 150 F 66 C |
| Service Temperature Min | -20 F -29 C |
| Tensile Strength - Longitudinal Direction | 23 lbs/in width 40.3 N/10 mm |
| Thickness | 1.75 mils 0.04 mm |
Storage & Usage Conditions
Tape should be stored in its original packaging in a cool, dry area away from direct sunlight and should be used within 12 months of date of shipment. Surfaces to which tape is applied should be clean, dry and free of grease, oil or other contaminants.
Physical and performance characteristics shown above are obtained from tests recommended by PSTC, ASTM, government agencies or Shurtape Technologies, LLC, Quality Assurance and Technical Service departments and do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user’s method of application before use.
Related products
Engineered to compliment rHP 255 Custom-Printed, 90% PCR rPET Hot Melt Packaging Tape for Recycled Cartons
