| Hot Melt
rHP 100
General Purpose Grade 90% PCR rPET Hot Melt Packaging Tape
Sustainable, general purpose packaging tape made with 90% post-consumer recycled (PCR) rPET film for manual or automated carton sealing. rHP 100 is engineered with an aggressive, high-tack hot melt adhesive and features Hold Strong® technology to keep carton seals intact.
rHP 100
General Purpose Grade 90% PCR rPET Hot Melt Packaging Tape
Sustainable, general purpose packaging tape made with 90% post-consumer recycled (PCR) rPET film for manual or automated carton sealing. rHP 100 is engineered with an aggressive, high-tack hot melt adhesive and features Hold Strong® technology to keep carton seals intact.
- 90% post-consumer recycled 19 micron rPET film
- Recycled™ Series general purpose grade, light duty packaging tape
- Instant, permanent bond to a wide range of substrates and surfaces
- High-tack synthetic rubber/resin hot melt adhesive featuring Hold Strong® technology for a long-lasting, secure seal
- Special release coating for Good to the Core® performance and consistent, low force unwind off the roll
- Performs reliably to the core for efficient tape consumption
Technical data for rHP 100
Sizes & Colors
Colors Available
| Standard Widths | 1.88 in, 2.08 in, 2.83 in 48 mm, 53 mm, 72 mm |
|---|---|
| Standard Lengths | 109.3 yd, 1640 yd 100 m, 1500 m |
Construction
| Adhesive | Synthetic rubber/resin hot melt adhesive |
|---|---|
| Backing | 19 micron 90% Post-Consumer Recycled rPET film |
Applicable Standards
| FDA Indirect Contact CFR 21, 175.105 |
Properties
| Standard Core Size | 3 in |
|---|---|
| Adhesion to Backing - Machine Rolls Only | 4 oz/in width 0.44 N/10 mm |
| Adhesion to Stainless Steel | 53 oz/in width 5.80 N/10 mm |
| Application Temperature Max | 110 F 43 C |
| Application Temperature Min | 35 F 2 C |
| Elongation | 125% 125% |
| Holding Power to Fiberboard | 10,000 minutes 10,000 minutes |
| Service Temperature Max | 150 F 66 C |
| Service Temperature Min | -20 F -29 C |
| Tensile Strength - Longitudinal Direction | 19 lbs/in width 33.3 N/10 mm |
| Thickness | 1.3 mils 0.03 mm |
Storage & Usage Conditions
Tape should be stored in its original packaging in a cool, dry area away from direct sunlight and should be used within 12 months of date of shipment. Surfaces to which tape is applied should be clean, dry and free of grease, oil or other contaminants.
Physical and performance characteristics shown above are obtained from tests recommended by PSTC, ASTM, government agencies or Shurtape Technologies, LLC, Quality Assurance and Technical Service departments and do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user’s method of application before use.
Related products
Engineered to compliment rHP 100 General Purpose Grade 90% PCR rPET Hot Melt Packaging Tape
