| Hot Melt
HP 535
Heavy Duty Grade Hot Melt Packaging Tape For Recycled Cartons
Specially formulated, heavy duty grade hot melt packaging tape for manual or automated industrial sealing of heavy, bulky, highly recycled cartons, particularly 100 percent recycled, in high stress and extreme handling conditions. HP 535 is designed with an enhanced adhesive system that offers higher shear, tack and adhesion to produce better seals, no matter the recycled content of the carton.
HP 535
Heavy Duty Grade Hot Melt Packaging Tape For Recycled Cartons
Specially formulated, heavy duty grade hot melt packaging tape for manual or automated industrial sealing of heavy, bulky, highly recycled cartons, particularly 100 percent recycled, in high stress and extreme handling conditions. HP 535 is designed with an enhanced adhesive system that offers higher shear, tack and adhesion to produce better seals, no matter the recycled content of the carton.
- Heavy duty grade packaging tape for use on highly recycled or 100 percent PWC/OCC cartons
- Aggressive quick stick, bonding strength and holding power for a long-lasting, secure seal
- Higher shear, tack and adhesion on recycled corrugated, recycled paper and a variety of other substrates
- Special release coating for consistent, low force unwind off the roll
- Performs reliably to the core for efficient tape consumption
Technical data for HP 535
Sizes & Colors
Colors Available
| Standard Widths | 1.88 in, 2.83 in 48 mm, 72 mm |
|---|---|
| Standard Lengths | 1000 yd, 54.6 yd 50 m, 914 m |
Construction
| Adhesive | Synthetic rubber/resin hot melt adhesive |
|---|---|
| Backing | 50 micron cast biaxially oriented polypropylene film |
Applicable Standards
| ASTM D 1974/D 1974M-22 |
| CID A-A-1684C |
| FDA Indirect Contact CFR 21, 175.105 |
Properties
| Application Temperature Max | 110 F 43 C |
|---|---|
| Adhesion to Stainless Steel | 62 oz/in width 6.8 N/10mm |
| Application Temperature Min | 35 F 2 C |
| Elongation | 150% 150% |
| Standard Core Size | 3 in |
| Holding Power to Fiberboard | 45,000+ minutes 45,000+ minutes |
| Service Temperature Max | 150 F 66 C |
| Service Temperature Min | -20 F -29 C |
| Tensile Strength - Longitudinal Direction | 42 lbs/in width 73.6 N/10 mm |
| Tensile Strength - Transverse Direction | 74 lbs/in width 129.6 N/10 mm |
| Thickness | 3.0 mils 0.076 mm |
Storage & Usage Conditions
Tape should be stored in its original packaging in a cool, dry area away from direct sunlight and should be used within 12 months of date of shipment. Surfaces to which tape is applied should be clean, dry and free of grease, oil or other contaminants.
Physical and performance characteristics shown above are obtained from tests recommended by PSTC, ASTM, government agencies or Shurtape Technologies, LLC, Quality Assurance and Technical Service departments and do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user’s method of application before use.
Related products
Engineered to compliment HP 535 Heavy Duty Grade Hot Melt Packaging Tape for Recycled Cartons
