HP 450
Custom-Printed, High Performance Grade Hot Melt Packaging Tape
High performance grade hot melt packaging tape that can be custom printed with a logo or message to prevent pilferage and allow personalization of outgoing cartons. Recommended for higher speed, critical closure carton sealing of large, bulky or heavy content cartons in manual or automated industrial sealing environments, HP 450 delivers extra high bonding strength and holding power to keep cartons secure.
HP 450
Custom-Printed, High Performance Grade Hot Melt Packaging Tape
High performance grade hot melt packaging tape that can be custom printed with a logo or message to prevent pilferage and allow personalization of outgoing cartons. Recommended for higher speed, critical closure carton sealing of large, bulky or heavy content cartons in manual or automated industrial sealing environments, HP 450 delivers extra high bonding strength and holding power to keep cartons secure.
- High performance grade, critical closure, heavy duty packaging tape
- Custom-printed for personalization
- Extra high bonding strength and holding power for a long-lasting, secure seal
- Instant, permanent bond to a wide range of substrates and surfaces
- Special release coating for consistent, low force unwind off the roll
- Performs reliably to the core for efficient tape consumption
- For hand use or automated applications
Technical data for HP 450
Sizes & Colors
Colors Available
| Standard Widths | 1.88 in, 2.83 in 48 mm, 72 mm |
|---|---|
| Standard Lengths | 100 yd, 109.3 yd 100 m, 914 m |
Construction
| Adhesive | Synthetic rubber/resin hot melt adhesive |
|---|---|
| Backing | 40 micron cast biaxially oriented polypropylene film |
Applicable Standards
| ASTM D 1974/D 1974M-22 |
| CID A-A-1684C |
| FDA Indirect Contact CFR 21, 175.105 |
Properties
| Standard Core Size | 3 in |
|---|---|
| Adhesion to Backing | 5 oz/in width 0.55 N/10 mm |
| Adhesion to Stainless Steel | 54 oz/in width 5.91 N/10 mm |
| Application Temperature Max | 110 F 43 C |
| Application Temperature Min | 35 F 2 C |
| Elongation | 150% 150% |
| Holding Power to Fiberboard | 35,000 minutes 35,000 minutes |
| Service Temperature Max | 150 F 66 C |
| Service Temperature Min | -20 F -29 C |
| Tensile Strength - Longitudinal Direction | 33 lbs/in width 57.8 N/10 mm |
| Tensile Strength - Transverse Direction | 58 lbs/in width 101.6 N/10 mm |
| Thickness | 2.5 mils 0.064 mm |
Storage & Usage Conditions
Tape should be stored in its original packaging in a cool, dry area away from direct sunlight and should be used within 12 months of date of shipment. Surfaces to which tape is applied should be clean, dry and free of grease, oil or other contaminants.
Physical and performance characteristics shown above are obtained from tests recommended by PSTC, ASTM, government agencies or Shurtape Technologies, LLC, Quality Assurance and Technical Service departments and do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user’s method of application before use.
Related products
Engineered to compliment HP 450 Custom-Printed, High Performance Grade Hot Melt Packaging Tape
