AF 995
Cold Temperature ASJ+ Tape
All Service Jacket+ (ASJ+) tape for sealing butt joints on ductboard and pipe insulation wrapped with ASJ+ faced backing. Linered and tested in accordance with UL 723, AF 995CT is constructed with a white poly-scrim-foil backing that inhibits mold growth and is DECA free, in addition to an all-weather acrylic adhesive that performs in temperatures ranging from -20 F to 260 F to deliver a permanent solution for use across a range of jobs.
AF 995
Cold Temperature ASJ+ Tape
All Service Jacket+ (ASJ+) tape for sealing butt joints on ductboard and pipe insulation wrapped with ASJ+ faced backing. Linered and tested in accordance with UL 723, AF 995CT is constructed with a white poly-scrim-foil backing that inhibits mold growth and is DECA free, in addition to an all-weather acrylic adhesive that performs in temperatures ranging from -20 F to 260 F to deliver a permanent solution for use across a range of jobs.
- All Service Jacket+ (ASJ+) tape
- Linered
- Superior stability during extreme fluctuations in temperature
- Tear-resistant backing that matches white duct and pipe insulation
Technical data for AF 995
Sizes & Colors
Colors Available
| Standard Widths | 2.83 in 72 mm |
|---|---|
| Standard Lengths | 50 yd 46 m |
Construction
| Liner | Non-contaminating, siliconized, flat, white, paper release liner |
|---|---|
| Adhesive | Cold temperature, white acrylic-based adhesive |
| Backing | White Kraft Paper/Scrim/Foil (ASJ+) DECA Free |
Applicable Standards
| Tested in accordance with UL 723 |
Properties
| Standard Core Size | 3 in |
|---|---|
| Adhesion to Stainless Steel | 80 oz/in width 8.76 N/10 mm |
| Service Temperature Max | 260 F 127 C |
| Service Temperature Min | -20 F -29 C |
| Tensile | 50 lbs/in width 87.6 N/10 mm |
| Elongation | 6.70% 6.70% |
| Thickness - With Liner | 12.6 mils 0.32 mm |
| Thickness - Without Liner | 8.3 mils 0.21 mm |
Storage & Usage Conditions
Tape should be stored in its original packaging in a cool, dry area away from direct sunlight and should be used within 12 months of date of shipment. Surfaces to which tape is applied should be clean, dry and free of grease, oil or other contaminants.
Physical and performance characteristics shown above are obtained from tests recommended by PSTC, ASTM, government agencies or Shurtape Technologies, LLC, Quality Assurance and Technical Service departments and do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user’s method of application before use.
Related products
Engineered to compliment AF 995CT Cold Temperature ASJ+ Tape
