Foil & Film Tapes

VP 500

VP 500 Embossed White Vinyl Tape

Contractor grade, embossed white vinyl tape used for seaming and patching white vinyl faced insulation. Engineered with an aggressive acrylic adhesive, VP 500 bonds tightly and permanently when smoothed down on the insulation surface.

Features & Benefits

  • Contractor grade white vinyl tape
  • Linered
  • Embossed white backing
  • Applicable Standards: FSI 5/SDI 10; UL 723
  • For available sizes and colors, reference the Technical Data Sheet in the Downloads section below

Related Products

VP 410

Line set tape offering UV resistance and a variety of colors.

VP 415

Warning stripe tape; meets OSHA requirements for hazard markings.

Typical Applications

    For seaming and patching white vinyl faced insulation

Specifications

Construction

  • Backing: Embossed white vinyl
  • Adhesive: Acrylic-based adhesive
  • Liner: NA

Properties & Technical Data

Property Standard Metric
Adhesion to Stainless Steel 40 oz/in width 4.37 N/10 mm
Elongation 70% 70%
Service Temperature Range 20 F to 176 F -7 C to 80 C
Tensile 10 lbs/in width 17.5 N/10 mm
Thickness - With Liner 7 mils 0.18 mm
Thickness - Without Liner 4.3 mils 0.11 mm

Physical and performance characteristics shown above are obtained from tests recommended by PSTC, ASTM, government agencies or Shurtape Technologies, LLC, Quality Assurance and Technical Service departments and do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user’s method of application before use.

Applicable Standards

FSI 5/SDI 10, UL 723

Sizes & Colors

Colors Available:

White (WHI) White (WHI)

Lengths Available: 50 yd

Widths Available: 2.83 in

Sizes and colors disclaimer:

Storage & Usage Conditions

Tape should be stored in its original packaging in a cool, dry area away from direct sunlight and should be used within 12 months of date of shipment. Surfaces to which tape is applied should be clean, dry and free of grease, oil or other contaminants.

Pin It on Pinterest