Cloth & Duct Tapes
PC 600 Contractor Grade, Co-Extruded Cloth Duct Tape
Contractor grade cloth duct tape for use in industrial, carpet, plumbing, HVAC, sealing, waterproofing, patching, remediation and restoration applications. This co-extruded duct tape conforms well to a variety of surfaces, tears easily by hand and will not twist or curl during application for ease of use.
Features & Benefits
- Contractor grade duct tape
- Will not twist or curl during application
- For available sizes and colors, reference the Technical Data Sheet in the Downloads section below
For general purpose use in industrial, carpet, plumbing, HVAC, sealing, waterproofing, patching, remediation and restoration applications
- Backing: Waterproof polyethylene film with a cloth carrier
- Adhesive: Natural rubber adhesive
- Liner: NA
Properties & Technical Data
|Adhesion to Stainless Steel||50 oz/in width||5.47 N/10 mm|
|Service Temperature Range||32 F to 200 F||0 C to 93 C|
|Tensile||22 lbs/in width||38.5 N/10 mm|
|Thickness||9.0 mils||0.23 mm|
Physical and performance characteristics shown above are obtained from tests recommended by PSTC, ASTM, government agencies or Shurtape Technologies, LLC, Quality Assurance and Technical Service departments and do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user’s method of application before use.
Sizes & Colors
Lengths Available: 60.1 yd
Widths Available: 0.94 in, 1.88 in, 2.83 in
Sizes and colors disclaimer:
Storage & Usage Conditions
Tape should be stored in its original packaging in a cool, dry area away from direct sunlight and should be used within 12 months of date of shipment. Surfaces to which tape is applied should be clean, dry and free of grease, oil or other contaminants.