Miscellaneous Other Tapes

IT 100

IT 100 Foam Pipe Wrap Insulation Tape

General purpose foam pipe wrap insulation tape designed for hot or cold pipe insulation applications. Convenient and easy to use, IT 100 adheres firmly to all metals, covering hot pipes to stop heat loss and cold pipes to prevent condensation drip.

Features & Benefits

  • General purpose grade foam pipe wrap insulation tape
  • Linered
  • Adheres firmly to all metals
  • Aggressive acrylic-based adhesive
  • Thermal conductivity is 0.28 at 75 F, in accordance with ASTM C-177
  • For available sizes and colors, reference the Technical Data Sheet in the Downloads section below

Typical Applications

    For hot and cold pipe insulation applications - cover hot pipes to prevent heat loss and cold pipes to prevent condensation drip

Specifications

Construction

  • Backing: Nitrile Butadiene Rubber (NBR) polymeric foam; closed cell elastomeric insulation
  • Adhesive: Acrylic-based adhesive
  • Liner: Siliconized, yellow paper release liner

Properties & Technical Data

Property Standard Metric
Elongation - Machine Direction 126% 126%
Service Temperature Range -20 F to 180 F -29 C to 82 C
Tensile Strength - Longitudinal Direction 6 lbs/in width 10.5 N/10 mm
Thickness - With Liner 122 mils 3.1 mm
Thickness - Without Liner 118.1 mils 3.0 mm

Physical and performance characteristics shown above are obtained from tests recommended by PSTC, ASTM, government agencies or Shurtape Technologies, LLC, Quality Assurance and Technical Service departments and do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user’s method of application before use.

Applicable Standards

NA

Sizes & Colors

Colors Available:

Black (BLK) Black (BLK)

Lengths Available: 10 yd

Widths Available: 2 in

Sizes and colors disclaimer:

Storage & Usage Conditions

Tape should be stored in its original packaging in a cool, dry area away from direct sunlight and should be used within 12 months of date of shipment. Surfaces to which tape is applied should be clean, dry and free of grease, oil or other contaminants.

Pin It on Pinterest