Foil & Film Tapes

AF 982

AF 982 Maximum-Strength, Linered Foil/Scrim/Kraft Tape

Maximum-strength Foil/Scrim/Kraft (FSK) tape for sealing, seaming and joining scrim-reinforced pipe and duct insulation. For use in all weather conditions, AF 982 is linered, features high tack and a permanent bond adhesive, offers a wrinkle-free backing that resists tearing, and is tested in accordance with UL 723.

Features & Benefits

  • Maximum-strength Foil/Scrim/Kraft (FSK) tape
  • Linered
  • Solvent-free
  • Wrinkle-free backing resists tearing
  • Resists water vapor and smoke transmission
  • Applicable Standards: FSI 10/SDI 10; UL 723
  • For available sizes and colors, reference the Technical Data Sheet in the Downloads section below

Related Products

AF 984

Maximum-strength Foil/Scrim/Kraft (FSK) tape for use on scrim-reinforced duct insulation.

AF 990

All Service Jacket (ASJ) tape for use in cold and dual temperature systems.

Typical Applications

    For sealing, seaming and joining scrim-reinforced pipe and duct insulation in all weather conditions

Specifications

Construction

  • Backing: Aluminum foil/fiberglass scrim/kraft paper
  • Adhesive: High-tack, synthetic rubber, all-weather adhesive
  • Liner: Non-contaminating, siliconized, flat, white, paper release liner

Properties & Technical Data

Property Standard Metric
Adhesion to Stainless Steel 60 oz/in width 6.57 N/10 mm
Application Temperature Range 32 F to 230 F 0 C to 110 C
Elongation 1% 1%
Tensile 40 lbs/in width 70.1 N/10 mm
Thickness - With Liner 9.4 mils 0.24 mm
Thickness - Without Liner 6.6 mils 0.17 mm

Physical and performance characteristics shown above are obtained from tests recommended by PSTC, ASTM, government agencies or Shurtape Technologies, LLC, Quality Assurance and Technical Service departments and do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user’s method of application before use.

Applicable Standards

FSI 10/SDI 10, UL 723

Sizes & Colors

Colors Available:

Silver (SIL) Silver (SIL)

Lengths Available: 50 yd

Widths Available: 1.88 in, 2.83 in

Sizes and colors disclaimer:

Storage & Usage Conditions

Tape should be stored in its original packaging in a cool, dry area away from direct sunlight and should be used within 12 months of date of shipment. Surfaces to which tape is applied should be clean, dry and free of grease, oil or other contaminants.

Pin It on Pinterest