Foil & Film Tapes

AF 912

AF 912 1.5 Mil, Linered Aluminum Foil Tape

Aluminum foil tape used in the HVAC industry to seal and join aluminum-backed duct wrap and for temporary metal repair. Engineered with a high-tack adhesive and tested in accordance with UL 723, AF 912 delivers an airtight, moisture-resistant bond and offers indefinite product life after application for confidence in a job well done.

Features & Benefits

  • 1.5 mil, dead-soft aluminum foil tape
  • Linered
  • Solvent-free
  • Resists water vapor, odor and smoke transmission
  • Indefinite product life after application
  • Applicable Standards: FSI 5/SDI 5; UL 723
  • For available sizes and colors, reference the Technical Data Sheet in the Downloads section below

Related Products

AF 075

Military grade aluminum foil tape for creating vapor barriers and waterproof seals, and for masking off areas when painting and electroplating.

AF 914

Cold temperature aluminum foil tape for use on aluminum-backed and fibrous insulation and metal ductwork, and to repair metal and sheet metal.

AF 973

2 mil, linered aluminum foil tape for airtight, moisture-free sealing in HVAC applications.

Typical Applications

  • For sealing and joining aluminum-backed duct wrap
  • Also used for temporary metal repair

Specifications

Construction

  • Backing: 1.5 mil, dead-soft aluminum foil
  • Adhesive: High-tack, synthetic rubber, all-weather adhesive
  • Liner: Non-contaminating, siliconized, flat, white, paper release liner

Properties & Technical Data

Property Standard Metric
Adhesion to Stainless Steel 90 oz/in width 9.85 N/10 mm
Application Temperature Range 32 F to 230 F 0 C to 110 C
Elongation 1% 1%
Tensile 11 lbs/in width 19.3 N/10 mm
Thickness - With Liner 6.4 mils 0.16 mm
Thickness - Without Liner 3.8 mils 0.10 mm

Physical and performance characteristics shown above are obtained from tests recommended by PSTC, ASTM, government agencies or Shurtape Technologies, LLC, Quality Assurance and Technical Service departments and do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user’s method of application before use.

Applicable Standards

FSI 5/SDI 5, UL 723

Sizes & Colors

Colors Available:

Silver (SIL) Silver (SIL)

Lengths Available: 50 yd

Widths Available: 1.88 in, 2.83 in

Sizes and colors disclaimer:

Storage & Usage Conditions

Tape should be stored in its original packaging in a cool, dry area away from direct sunlight and should be used within 12 months of date of shipment. Surfaces to which tape is applied should be clean, dry and free of grease, oil or other contaminants.

Pin It on Pinterest